Simple Customization
How to Iron-on Patches
Iron-on patches are a simple way to express yourself and bring more life to a jacket, pair of jeans, hat, shoes, jerseys, and much more. Consider refreshing them with some iron-on patches. However, without the proper instructions, it is easy to make mistakes when attempting to iron on patches.
When ironing on. Steam from the iron may prevent the adhesive from activating properly.
Applying heat to certain materials, such as polyester, may damage them. Make sure to check all tags to ensure it is safe to apply heat.
Cold wash or hand washing is preferred for lasting effects. High heat may affect adhesion.
Easy step-by-step iron-on instructions!
Iron-on patches can usually stay on for 25 washes before they may start to peel off. For a permanent application, it is recommended to sew on the iron-on patches. Your local dry cleaner or tailor should be able to sew them on.
Do iron-on patches work on all materials?
Iron-on patches can be washed on the gentle cycle in cold water. For drying, the lowest heat setting is recommended. If you only iron-on the patches, the adhesive may loosen as a result. This occurs for any iron-on patch and a permanent solution such as sewing is recommended.
Iron on Instructions
Grab a clothing iron, ironing board, your iron-on patch(es), and a thin piece of fabric. Use an old t-shirt, pillowcase, or cotton fabric sheet to protect the patch and garment from direct heat. For chenille or 3D Puff patches it is recommended to apply light pressure and heat from the back only. Use a padded surface to avoid flatting.
Clothing Iron - Press Cloth - Desired Patch(es)
Pre-heat iron for 5 minutes on the higher setting (No Steam)
Place patch(es) on the desired location of the garment.
Place a press cloth over patch(es) and iron firmly for 25 seconds.
Reverse garment inside out and repeat the ironing process.
Gently check if the patch(es) adhered properly. Repeat if needed.
